3.0.2 Update
Version 3.0.2 Feature Upgrades
USB Relay for Access Control
Connect USB Relay Box to TAURI for access controls after temperature checked.
Display Signage
Play customized video and photos when no scans are performed on TAURI. Promote brand/products with a personalized message.
Dual Monitor Display
TAURI can be connected to a separate monitor through HDMI output and the results of the temperature data are shown to a secondary screen for privacy concerns.
Print Temperature Check Results
Print out details and photo of the temperature checked person using a Glory Star approved printer.
Questionnaire
Customize 10 questions to ask people who get temperature checked, including response log.
Low Temperature Detection
After entering from a cold place, TAURI is able to detect it is out of range, as ask for a re-scan.
API - Third Party System Integration
The data collected from TAURI devices be sent to a designated server of your choosing, allowing integration with third party systems.
New Features in Action:
How to set, print and export Questionnaire
How to integrate TAURI to third party integration (API)
How to connect TAURI to secondary screen through HDMI
Posted January 7, 2021
2.0.4 Update is here!
Version 2.0.4 Feature Upgrades
Bootup
2 new features has been added during the bootup process:
1. At the bootup page where it requires to enter the facial recognition license code. A connect to Wi-Fi icon has been added at the upper right corner in order to prevent user from going to StarOS to connect to Wi-Fi.
2. Bootup Disclaimer page can now be neglected upon bootup by selecting the “Don’t Show This” bubble on top of I agree.
Display Language
The following display languages has been revised to a more local tone
1.French
2.Japanese
English has also been revised to a more local tone
Update Tauri
Beta Version
This has been added for customer who wants to test Tauri application that are still being developed. Once approved by Glorystar, they will receive a access code via email that will enable them to OTA the beta version. However bet version cannot be reverse back and would require to reset the system and upgrade back to newest update to go back to mass production mode.
USB Update
Offline update can be used by plugging in new apk file into USB and once plugged in, it will auto start installation process.
Face detection utilities
Face Detection
Enable – will activate all facial detection feature
Disable – will be the same feature as 1.0.6, device will constant be detecting temperature and will sound alarm when high temperature is detected (set under range)
High Temperature email notification
Besides sending a screenshot to email, email will also indicate a text indicating the temperature value. This is to solve issue when screenshot come back without temperature value when detection was too fast.
Facial detection settings
1. 1:n has been change to Face Search – same feature just different wrong wording
2. Quality control parameters - Light has been auto set as 0, this is to improve mask detection and dark skin detection
Developer Settings
Manual Calibration
A ”please wait loading” notification has been added once the value figure were modified manually. Reason is because the value needs to be in sync with figure inside the heat module.
Auto Calibration (Recommend)
Plug in the number of your body temperature and the device will auto adjust to the most correct emissivity setting according to it. All device with 2.0.3 has already been auto calibrate, but it is the method of calibrate we recommend if customer wants to do another calibration.
Extract data from API
Customer will need to create a URL server for device to send JSON. The API enables users to grab data about temperature detected, pass/failed, mask on or not, device serial number, etc. See documentation for more detail on this feature.
FAQ
What is the bootup process longer than before?
Device is taking time to sync with heat module making sure that emissivity is the same as calibrated.
Auto Calibration not working?
Do auto calibration in a stable temperature environment when temperature is constant. Do not have a fan near you while doing the calibration.
Do I have to recalibrate sensor if I reset tablet?
Yes, we would recommend to do an auto-calibration to make sure that the temperature is correct.
Do I have to enter a license code every time I do an OTA update or factory reset ?
For OTA update, you do not to have enter license code once the update has been initiated. However factory reset would prompt you back to entering the license code. We are working on future release to prevent this for a more user friendly experience.
Tauri 7 and Tauri 10/156/215 same update method ?
Tauri 7 requires an firmware update that can only be access via local USB update for this version only. Tauri 10/156/215 can be OTA updatable.
Posted September 22, 2020
Exciting news!
Version 2.0.1 Feature Upgrades
The new features include:
-
Calibration
-
Face detection
-
Face recognition
-
Customized high temperature alert message
-
Mask reminder message
-
Email notifications for high temperature and many more
Important reminders:
Please note that once the activation process is completed, TAURI is unable to go back to the previous version.
Please follow the detailed instruction manual and video provided.
Each activation code should correspond to each serial number, and no activation code can be used twice or an another TAURI device if it has been activated before.
Please contact your local distributor or reseller for FREE activation codes for TAURI's purchased before June 12, 2020.
Posted June 12, 2020